亚马逊禁止销售哪种类型的婴儿睡姿固定垫？发布新的亚马逊危险品（危险物质）时，必须提供的具体信息

亚马逊禁止销售哪一种类型的婴儿睡姿固定不动垫？公布新的亚马逊危险物品（风险成分）时，务必给予的实际信息引言

亚马逊禁止销售哪一种类型的婴儿睡姿固定不动垫？：婴儿睡姿固定不动垫关键：假如您在亚马逊商城系统销售产品，则必须要遵循适用这种产品和产品信息的全部联邦政府、州和地区法律法规及其亚马逊现行政策。婴儿睡姿固定不动垫用以协助宝宝在睡觉时维持平躺着、侧躺或偏斜姿态。一样，亚马逊也禁止公布新的亚马逊危险物品（风险成分）时，务必给予的实际信息危险物品所需信息和文档（风险成分）公布新的亚马逊货运物流 (FBA) 产品时，务必向亚马逊给予危险物品（风险成分）的实际信息。建立产品信息后，大家很有可能必须您给予安全性数据分析表 (SDS) 或商品成份信息表。如不提

亚马逊禁止销售哪一种类型的婴儿睡姿固定不动垫？

婴儿睡姿固定不动垫

关键：假如您在亚马逊商城系统销售产品，则必须要遵循适用这种产品和产品信息的全部联邦政府、州和地区法律法规及其亚马逊现行政策。

婴儿睡姿固定不动垫用以协助宝宝在睡觉时维持平躺着、侧躺或偏斜姿态。

一样，亚马逊也禁止销售宝宝偏斜睡眠用品。

亚马逊禁止销售哪一种类型的婴儿睡姿固定不动垫？

禁止销售全部“带枕垫”类型的婴儿睡姿固定不动用具。美国食品和药物管理局 (FDA) 强调该类婴儿睡姿固定不动垫存有室息风险性，不建议应用。相关大量信息，请浏览FDA 网址。

带枕垫类型的婴儿睡姿固定不动垫（禁止销售）

亚马逊官方网站全文详细信息：

Infant sleep positioners

Important:If you supply products for sale on Amazon, you must comply with all federal, state, and local laws and Amazon policies applicable to those products and product listings.

Infant sleep positioners are used to position an infant on their back, side, or on an incline for sleep.

Similarly,infant inclined sleep productsare also restricted on Amazon.

What type of infant sleep positioners are restricted on Amazon?

All "mat with bolsters" type infant sleep positioning products are prohibited. The US Food and Drug Administration (FDA) has advised that this type of infant sleep positioner not be used due to risk of suffocation. More information is available on theFDA website.

Mat with bolsters infant sleep positioners (restricted for sale)

文章正文：亚马逊官网

公布新的亚马逊危险物品（风险成分）时，务必给予的实际信息

危险物品所需信息和文档（风险成分）

公布新的亚马逊货运物流 (FBA) 产品时，务必向亚马逊给予危险物品（风险成分）的实际信息。

建立产品信息后，大家很有可能必须您给予安全性数据分析表 (SDS) 或商品成份信息表。如不给予必不可少的信息和文档，则有可能造成国际包裹延迟时间和顾客派送撤消。

要提交安全性数据分析表或商品成份信息表，请转到提交危险物品文档专用工具。相关危险物品的大量信息，请播放下列商家高校短视频：危险物品介绍和危险物品观念。

关键：即使您的产品不属于受管控危险物品，大家也建议在建立产品时给予一切能用的危险物品信息或文档。这有利于限制一切解决延迟时间。

在本网页页面，您将掌握：

新产品

建立和变换亚马逊货运物流产品时所需的危险物品信息，及其怎样给予该类信息

目前产品将产品变换为亚马逊货运物流产品后很有可能必须给予的危险物品文档：安全性数据分析表和商品成份信息表

新产品

建立亚马逊货运物流产品或将产品变换为由亚马逊物流运输时，您务必为充电电池和归属于受管控危险物品的产品给予危险物品信息。（最先点一下工作内容中的【加上危险物品信息】。） 请尽量给予精确且详细的信息，便于您的产品能归于恰当归类并可一切正常销售。

充电电池的选填信息

在【充电电池信息】下，告知大家您的产品是充电电池或是应用充电电池。假如您回应【是】，则要大量信息，如下所示上述。

充电电池怎样在产品上应用？

从下拉列表挑选下列至少一项：

【单独充电电池】 - 假如产品是单独充电电池（如笔记本充电电池拆换件）或与不由自主其能提供电力工程的产品一同销售（如与充电头一同销售的手机上预留充电电池），挑选该项。外界电池充电器（如移动充电器）归属于充电电池。

【充电电池与设备包装在一起】 - 假如充电电池随附在由其能提供电力工程的专用设备的包裝中，但未拼装在设施內部，挑选该项。比如，包裝中附加脱卸式充电电池的手机上。

【充电电池安裝在机器设备上】 - 假如充电电池内置或拼装在产品内（如 Kindle 平板），挑选该项。

【独立销售】 - 假如充电电池未随附在包装设计中，挑选该项。

充电电池成份

从下拉列表中挑选充电电池成份（比如：偏碱、磷酸铁锂）。此信息通常印在充电电池自身或其包裝上。

假如您的充电电池产品应用充电电池，则可能是危险物品，必须给予下列一部分或所有信息：

充电电池类型/规格

从下拉列表中挑选充电电池类型（比如： AAA、CR123A）。此信息通常印在充电电池自身或其包裝上。假如您不清楚充电电池类型，挑选【不明】。

充电电池总数

输入您充电电池的总总数，包含预留充电电池。

充电电池净重（克）

输入您产品随附的任何充电电池的总重（以克为企业）。这也是指单独充电电池或是以包裝或很有可能应用充电电池的一切机器设备中拿出的充电电池的净重。

锂电池组的充电电池模块数

输入您充电电池模块的总总数，包含配件。

留意：“充电电池模块”是具备正负极两边的单独一个蓄电池模块。“充电电池”就是指组成单独一个控件的2个或好几个充电电池模块。比如，电视遥控器通常应用2个 AA 充电电池模块，这两个充电电池模块装在智能遥控器后边的电池中。除此之外，一个笔记本充电电池很有可能有六个充电电池模块，这种充电电池模块封装形式在充电电池的塑料外壳内。针对包括好几个充电电池模块的充电电池，通常可在充电电池包裝上或生产商的技术性信息中寻找充电电池模块总数信息。

锂电包裝

请从下拉列表中挑选准确的配备，以表明充电电池怎样与设备包装在一起（如充电电池安裝在机器设备上）。

每一个充电电池的瓦时长

假如您的产品是锂电池、包括锂电池或与锂电池一同销售，输入您每一个充电电池的瓦时 (Wh) 额定电流。此信息通常印在充电电池自身、充电电池包裝或生产商的技术资料中。

留意：假如以上一部分未印出来瓦时长，您可以依据电池电压 (V) 和安时 (Ah) 额定电流测算出瓦时长。电池电压和安时额定电流通常也印在充电电池自身、其外包装盒或生产商的文本文档中。测算瓦时长时要应用充电电池的额定电流（通常仅表明为“工作电压”），不必将其与“键入工作电压”、“输出电压”或“最大电池充电工作电压”搞混。测算产品的瓦时长

锂成分（克）

假如您的产品是锂金属电池、包括锂金属电池或与锂金属电池一同销售，输入您锂成分（以克为企业）。通常可在生产商的技术性信息中寻找此信息。

留意：针对此内容，务必自始至终应用生产商带来的锂成分（若有）。假如生产商没法保证此信息，您还能够依据每一个充电电池模块的安时 (Ah) 额定电流（如已经知道）测算等效电路锂成分。测算您产品的锂成分

相关大量信息，请收看商家高校中相关充电电池问题的协助。

危险物品政策法规所需信息

在【产品政策法规信息】下，告知大家您的产品是不是归属于在运送、仓储物流、废旧处理层面遭受管控的危险物品或风险成分，或是以上三种状况皆有。假如您的产品不属于危险物品（风险成分），请回答【否】。

假如您回应【是】，请从【指出类型】下拉列表中挑选可用项。依据您挑选的內容，必须在下边给予大量信息（假如您回应【不确定性】，这也一样可用）。此信息可以包含下列所有或一部分內容：

联合国组织风险货品识别码

可在安全性数据分析表 (SDS) 中寻找此信息，也可以向生产商获得此信息。在识别码前标明“UN”（比如 UN1266），正中间不可有一切空格符。

产品净重（Kg）

键入净重，企业为Kg (1 lb = 0.45 kg)。

产品容量（mL）

键入汽体或液态的容积（企业：mL）(1 fl oz = 29.6 ml)。

归类/GHS 符号图片

假如您的产品被 GHS/CLP 规范视作危险物品（风险成分），挑选商品包装或 SDS 上显示信息的每一个符号图片。（GHS 意味着全世界统一归类规章制度，而 CLP 是归类、贴标签和包裝。）

相关 GHS/CLP 符号图片实例，请浏览危险物品（风险成分）鉴别指引。要掌握相关 GHS 的大量信息，客户程序英国职业安全和身心健康管理处 (OSHA)网址。

除此之外，请给予下列信息（若有）：

安全性数据分析表 URL。您可以向生产商索要产品的安全性数据分析表。大量安全性数据分析表信息如下所示。

引燃。产品的引燃决策其易燃性性。请指出您产品的引燃，以℃ (ºC) 为企业。可在安全性数据分析表中寻找此信息，也可以向生产商获得此信息。

建立产品或将产品变换为亚马逊货运物流产品后，审批步骤必须 4 个工作中日。客户程序亚马逊货运物流危险物品审批步骤掌握大量信息。

应用【搜索 ASIN】 专用工具查询您的亚马逊货运物流 ASIN 的归类情况。

我的产品归属于危险物品吗？

您要如何解决？

搜索 ASIN

危险物品疑难问题

下一页

提交安全性数据分析表 (SDS) 和商品成份信息表并跟踪其情况

关键：假如以上规定的信息缺少，则没法建立产品信息或将产品信息变换为亚马逊货运物流产品。除此之外，假如给予的信息不详细、不确切或互相矛盾，您的产品很有可能会被冻洁没法销售，且必须给予大量信息（客户程序下列一部分）。

目前产品

危险物品精英团队会审批每一个变换为亚马逊货运物流的 ASIN（假如产品被确认为潜在性危险物品）。

针对具备详细并恰当的危险物品信息的产品，大家将在四个工作中日内对它进行审批和归类。（工作中日为周一至周五，不包括节假日日。） 信息不详细、不确切或互相矛盾的产品很有可能会被冻洁，没法根据亚马逊货运物流开展销售。

为保证您的全部恰当归类，您很有可能必须给予下列一份或二份文档：

安全性数据表：假如您未提交安全性数据表、您提交的数据表合不来规定或在其中的信息互相分歧，请向生产商索要详细且恰当的安全性数据表并提交。假如您的商品没有一切有危害的化工品（比如乙醇、酸、钠）但您没法得到安全性数据表，请提交商品成分信息表。

商品成分信息表：假如您未给予详细且精确的信息，请提交充电电池和电池驱动商品或不富含害2次的商品的商品成分信息表。

amazon会按时审批营销中心内很有可能归属于受管控危险品的商品，以保证国际包裹合乎政策法规和检测标准。假如发觉您的商品缺乏详细的危险品信息，大家会需要您递交安全性数据表或商品成分信息表。

关键：假如您的商品被确认为潜在性危险品，而库存量已存储在亚马逊运营核心，大家将根据邮件通告您。您必须在 14 个工作中日内给予所规定的文档。假如在这段时间未给予有关文档，大家将废置库存量，花费由您担负。

客户程序危险品（风险成分）审批步骤。

安全性数据表

安全性数据表（也称之为 SDS，之前称之为原材料安全性数据表）包括由生产厂家或采购商提前准备的 16 个一部分。安全性数据表叙述商品的物理学和有机化学特性、对人体和身心健康的伤害、触碰方式、安全性解决和采用的常见问题、急救措施及其控制方法。

安全性数据表让amazon可以：

明确您的商品是不是归属于受管控危险品

对您的商品开展恰当归类，明确其是不是归属于危险品（归类决策着商品的存放和运输工具）

在商品于营销中心产生泄漏或外溢时明确合理的处置和废置对策

确定您的商品是不是为非管产品

要符合规定，安全性数据表务必：

过去五年内建立或有升级

包括新的 GHS/CLP 危险品鉴别信息

与您的商品信息相符合

商品名字（即宝贝详情表面表明的商品名字）与安全性数据表上显示信息的商品名字同样

安全性数据表上商品的生产商或品牌名字与宝贝详情表面表明的名字同样

包括规范安全性数据表的全部 16 个一部分

相关大量信息，请收看商家高校短视频递交安全性数据表。

提交安全性数据表

要提交安全性数据表，请转到提交危险品文档专用工具。危险品精英团队将在 4 个工作中日内审批您的安全性数据表。

为防止归类延迟时间，请确保您的安全性数据表合乎以上规定。应用上边的【搜索 ASIN】专用工具查验您的商品情况。

关键：假如您的商品是捆缚商品或包括好几个有机化学商品的模块，那麼您务必为捆缚商品或模块中的每一个商品给予安全性数据表。

商品成分信息表

针对不规定给予安全性数据表的商品，商品成分信息表仅适用下列2个归类：

充电电池和电池驱动商品

不富含害2次的商品

关键：假如您为不属于这两个归类的商品递交商品成分信息表，则该表将被拒绝。请尽量详细且恰当输入您的商品成分信息表，以保证其被接纳。危险品精英团队将在四个工作中日内审批您的商品成分信息表。

提交商品成分信息表

最先，搜索相关您商品归类的信息：

充电电池和电池驱动商品。查询商品包裝、商品指南或充电电池自身，寻找实际的充电电池信息（如瓦时和工作电压）。相关锂电的大量信息，客户程序对于锂电或附加锂电的商品的规定。

不富含害2次的商品。查询商品包裝或商品自身，以寻找特殊信息，如成分、符号图片或提醒语。

下面，转至提交危险品文档专用工具并依照下列流程在线下载相对应的商品成分信息表：

在网页页面右边，寻找商品成分信息表的最好语言表达。

点一下【充电电池和电池驱动商品的商品成分信息表】或点一下【不富含害2次的商品的商品成分信息表】。

下载模板后，请填好以鲜红色突显的全部表格中。依据您的回应，大量表格中很有可能会变成鲜红色。也请填好这种表格中。

将该文件储存到您的电脑。

留意：信息不详细或互相矛盾的文本文档无法保存。假如发生不正确，请更改不正确，随后储存文档。

文件上传。

亚马逊官网全文详细信息：

Dangerous goods required information and documentation (hazmat)

Specific dangerous goods (hazmat) information must be provided to Amazon when you list a new product on Fulfillment by Amazon (FBA).

After your listing is created, we may require a safety data sheet (SDS) or exemption sheet from you. Not providing required information and documentation can result in delayed shipments and canceled customer deliveries.

To upload an SDS or exemption sheet, go to theupload dangerous goods documents tool. For more information on dangerous goods, watch these Seller University videos:Intro to Dangerous GoodsandDangerous Goods Awareness.

Important:Even if your product is not regulated as a dangerous good, we recommend that you provide any available dangerous goods information or documentation when you create your offer. This will help reduce any delays in processing.

On this page, you’ll learn about:

New listings

Dangerous goods information required during FBA listing creation and conversion, and how to provide this information

Existing listingsDangerous goods documentation that may be required after your listing has been converted to FBA:safety data sheetsandexemption sheets

New listings

When creating or converting a listing for FBA, you must include dangerous goods information for bothbatteriesandproducts regulated as dangerous goods. (Start by clickingAdd dangerous goods informationin the workflow.) Make sure to provide accurate and complete information so that your product is properly classified and not blocked for sale.

Required information for batteries

UnderBattery information, tell us whether your product is a battery or uses batteries. If you answerYes, more information will be required, as outlined below.

How are batteries utilized with this product?

Select one of the following from the drop-down menu:

Batteryif the product is a standalone battery (for example, replacement laptop battery) or if the battery is sold with items that it doesn’t power (for example, spare cell phone battery sold with a charger). External battery chargers (such as power banks) are considered batteries.

Packed withif the battery is packed with, but not inside, the device that it powers. For example, a cell phone with the removable battery packed alongside the phone.

Contained inif the battery is pre-installed or assembled in the item (for example, Kindle tablet).

Sold separatelyif the battery is not included in the product’s package.

Battery composition

Select the battery composition from the drop-down menu (examples: alkaline, lithium-ion). This information is usually printed on the battery itself or on its packaging.

If your battery product uses batteries, it may be a dangerous good that requires some or all of the following information:

Battery type/size

Select the type of battery from the drop-down menu (examples: AAA, CR123A). This information is usually printed on the battery itself or on its packaging. If you don’t know the battery type, selectUnknown.

Number of batteries

Enter the total number of batteries, including spares.

Battery weight (grams)

Enter the total weight of all batteries included, in grams. This is the weight of the standalone battery or batteries weighed outside the packaging, or any device that it may be used in.

Cells per battery

Enter the total number of cells, including spares.

Note:A “cell” is a single electrical storage unit with one positive and one negative end. A “battery” is two or more cells that form a single component. For example, a TV remote will commonly use two AA cells installed in the back compartment. Additionally, a single laptop battery may have six cells within the plastic casing of the battery. Cell count information for multi-cells batteries can often be found on the packaging of the battery or in the manufacturer’s technical information.

Lithium battery packaging

Select the correct configuration from the drop-down menu describing how the battery is packaged in relation to the device (for example, batteries contained in equipment).

Watt-hours per battery

If your product is, contains or is sold with alithium-ionbattery, enter the watt-hour (Wh) rating per battery. This information is usually printed on the battery itself, on its packaging, or in the manufacturer’s technical documentation.

Note:When watt-hours is not printed, it can be calculated from the battery voltage (V) and amp-hour (Ah) rating, also commonly printed on the battery, the outer packaging, or in the manufacturer’s documentation. The voltage to be used when calculating watt-hours is thenominal voltageof the battery (commonly printed as simply “voltage”), not to be confused with the input voltage, output voltage, or max charging voltage.Calculate the watt-hours of your product

Lithium content (grams)

If your product is, contains, or is sold with alithium-metalbattery, enter the lithium content, in grams. This information can usually be found in the manufacturer’s technical information.

Note:Lithium content supplied by the manufacturer must always be used for this entry, if available. If the manufacturer can’t supply this information, an equivalent lithium content can also be calculated if the amp-hour (Ah) rating per cell is known.Calculate the lithium content of your product

For more information, watchHelp with Battery Questionsin Seller University.

Required information for dangerous goods regulations

UnderProduct regulation information, tell us whether your product is considered a dangerous good or hazardous material regulated for transportation, storage, waste, or all three. If your product is not considered a dangerous good or hazmat, answerNo.

If you answerYes, select whatever applies from theIndicate typedrop-down menu. Based on what you select, more information will be required below (this also applies if you answerNot sure). This information can include all or some of the following:

UN number

This information can be found on the safety data sheet (SDS) or obtained from the manufacturer. Include “UN” before the number (for example, UN1266), without any spaces in between.

Product weight (kilograms)

Enter the weight in kilograms (1 lb = 0.45 kg).

Product volume (milliliters)

Enter volume in milliliters for a gas or liquid (1 fl oz = 29.6 ml).

Categorization/GHS pictograms

If your product is considered a dangerous good or hazmat by GHS/CLP standards, select each pictogram that appears on your product’s packaging or SDS. (GHS stands for Globally Harmonized System of Classification, while CLP is Classification, Labeling, and Packaging.)

For examples of GHS/CLP pictograms, visitDangerous goods identification guide (hazmat). To learn more about GHS, also see the Occupational Safety and Health Administration (OSHA)website.

If available, also provide the following information:

Safety data sheet URL.The SDS of your product can be obtained from the manufacturer. More SDS information is below.

Flash point.The flash point of a product determines its flammability. Indicate the flash point of your product in Celsius (ºC). This information can be found on the SDS or can be procured from the manufacturer.

Once your product is created or converted to FBA, the review process takes four business days. For more information, seeFBA dangerous goods review process.

Use theLook up an ASINtool to check the classification status of your FBA ASIN.

Check if a product is a dangerous good

Look up an ASIN

Dangerous Goods FAQ

Next

Upload and track the status of your safety data sheets (SDS) and exemption sheets

Important:If the information requested above is missing, a product listing cannot be created or converted to FBA. Also, if the provided information is incomplete, inaccurate, or conflicting, your product may be blocked for sale and more information will be required (see section below).

Existing listings

The Dangerous Goods team reviews each ASIN converted to FBA if the product is identified as a possible dangerous good.

Products with complete and correct dangerous goods information will be reviewed and classified within four business days. (Business days are Monday through Friday, excluding public holidays.) Products with incomplete, inaccurate, or conflicting information may be blocked for sale through FBA.

To ensure that your product is classified correctly, one or both of the following documents might also be required:

A safety data sheet:If you haven't uploaded an SDS, the one that you uploaded is not valid, or the information in it is contradictory, obtain a complete and correct SDS from the manufacturer and upload it. If your product does not contain any harmful chemicals (for example, alcohol, acid, and sodium) and you can’t obtain an SDS, upload an exemption sheet.

Exemption sheet:If you haven't provided complete and accurate information, upload an exemption sheet for either batteries and battery-powered products or for products without harmful chemicals.

Amazon regularly reviews products in our fulfillment centers that may be regulated as dangerous goods to ensure that shipments comply with regulations and safety standards. If your product is found to be missing complete dangerous goods information, we’ll ask you to submit either an SDS or exemption sheet.

Important:If your product is identified as a possible dangerous good while inventory is already in an Amazon fulfillment center, we will notify you by email. You will have 14 business days to provide the requested documentation. If the documentation is not provided during this period, the inventory will be disposed of, at your expense.

For more information, seeDangerous goods review process (hazmat).

Safety data sheets

A safety data sheet (or SDS, previously known as a material safety data sheet) contains 16 sections prepared by the manufacturer or importer. An SDS describes a product’s physical and chemical properties, physical and health hazards, routes of exposure, precautions for safe handling and use, emergency and first-aid procedures, and control measures.

An SDS enables Amazon to:

Determine whether your products are regulated as dangerous goods

Correctly classify your products as either dangerous goods or non-dangerous goods (the classification determines how products are stored and transported)

Determine the correct handling and disposal measures if a product spills or leaks at a fulfillment center

Confirm your products as non-regulated goods

To be compliant, an SDS must:

Be created or updated within the past five years

Include new GHS/CLP hazard identification information

Match your product listing

Listing title (the product name, as it appears on the detail page) is the same as the product name shown on the SDS

Manufacturer or brand name of your product on the SDS is the same as what appears on the detail page

Include all 16 standard SDS sections

For more information, watch the Seller University videoSubmitting Safety Data Sheets.

Uploading safety data sheets

To upload an SDS, go to theupload dangerous goods documents tool. The Dangerous Goods team will review your SDS within four business days.

To avoid classification delays, make sure that your SDS complies with the requirements listed above. Use theLook up an ASINtool above to check the status of your product.

Important:If your listing is a bundle or a kit with multiple chemical-based products, you must provide an SDS for each product within the bundle or kit.

Exemption sheets

For products that don’t require an SDS, an exemption sheet is acceptable for these two categoriesonly:

Battery and battery-powered products

Products without harmful chemicals

Important:If you submit an exemption sheet for products not in these two categories, it will be rejected. Be sure to fill in your exemption sheet completely and correctly to ensure that it’s accepted. The Dangerous Goods team will review your exemption sheet within four business days.

Uploading exemption sheets

First, find information for your product’s category:

Battery and battery-powered products.Review the product packaging, the product manual, or the battery itself to find specific battery information such as watt-hours and voltage. For more information on lithium batteries, seeRequirements for lithium batteries and products that contain lithium batteries.

Products without harmful chemicals.Review the product packaging or the product itself to find specific information such as ingredients, pictograms, or warning phrases.

Next, go to theupload dangerous goods documents tooland follow these steps to download the appropriate exemption sheet:

On the right side of the page, find your preferred language for the exemption sheet.

Click eitherExemption sheet for battery and battery-powered productsorExemption sheet for products without harmful chemicals.

After the template has downloaded, fill in all cells highlighted in red. Depending on your answers, further cells may turn red. Fill in those cells too.

Save the document on your computer.

Note:Documents with incomplete or conflicting information cannot be saved. If there are errors, correct them and then save the document.

Upload the document.

文章正文：亚马逊官方网址