在亚马逊销售的电池，有什么预处理要求？亚马逊官方发布：Amazon handmade手工电子产品配件指南

在亚马逊平台市场销售的电池，有哪些预备处理规定？亚马逊官方公布：Amazon handmade手工制作电子设备零配件指南引言

在亚马逊平台市场销售的电池，有哪些预备处理规定？：包装电池在这里网页页面上，您将掌握怎样妥当提前准备电池，保证他们在派送的过程中遭受维护。关键：不遵循亚马逊物流商品提前准备规定、安全性规定及商品限定标准很有可能会造成下列不良影响：亚马逊运营核心拒绝库存量，废置或退回库存量，严禁卖亚马逊官方公布：Amazon handmade手工制作电子设备零配件指南做为手工艺人，您的手工制作电子设备零配件商品务必合乎下列指南的规定

在亚马逊平台市场销售的电池，有哪些预备处理规定？

包装电池

在这里网页页面上，您将掌握怎样妥当提前准备电池，保证他们在派送的过程中遭受维护。

关键：不遵循亚马逊物流商品提前准备规定、安全性规定及商品限定标准很有可能会造成下列不良影响：亚马逊运营核心拒绝库存量，废置或退回库存量，严禁商家将来向营销中心推送国际包裹，或是amazon对一切计外服务项目收费标准。

干电池务必妥当包装，保证他们可以安全性存储且搞好派送提前准备。请保证电池固定不动在包装内，防止电池接线端子和金属材料（包含别的电池）触碰。 电池不能到期或发生残损；如果是整包市场销售，包装上务必清楚标识有效期限。这种包装指南包含整包市场销售和多包成套设备市场销售的电池。

有关指南：

对于锂电池或含有锂电池的商品的规定

箱装商品

套服市场销售

怎样为商品贴上有效期限标识

容许的包装原材料（硬包装）：

初始生产商包装

小箱子

塑胶吸朔

严禁的包装原材料（除防止应用硬包装的状况）：

拉链袋

收拢包装

包装指南

保证包装好的电池可以根据 4 英寸跌落测试，落在硬实表层上而不发生损坏状况。一个跌落测试包括五次坠落。

底端平落

顶端平落

长边平落

长边平落

角处降落

保证再次包装的电池用小箱子或安全性密封的塑胶吸朔包装。

假如多包电池封装形式在初始生产商包装中，则不用对电池开展附加箱装或密封性。假如电池开展了再次包装，则必须选用密封箱或密封性硬塑料吸朔包装。

针对锂电池，请遵循对于锂电池或含有锂电池的商品的规定中所显示的有关政策法规。

运送很有可能在/从包装中松脱的电池。

运送接线端子很有可能互相触碰的电池。

运送仅选用拉链袋、收拢包装或别的非硬包装封装形式的电池。

捆缚商品

以捆缚方式成套设备市场销售的多包电池务必遵循包装和提前准备规定协助网页页面中要求的规定。并且，整捆都需要合乎下边叙述的硬包装规定。

硬包装界定

电池的硬包装界定为接下来的一项或几类：

初始生产商塑胶吸朔或罩板包装。

应用胶布或收拢包装密封性的小箱子对电池开展再次包装。电池在箱里不可翻转，且电池接线端子不可互相触碰。

应用胶布或收拢包装封装形式的吸朔包装对电池开展再次包装。电池接线端子在包装内不可互相触碰。

亚马逊官网全文详细信息：

Packaging batteries

On this page, you will learn how to properly prep batteries so that they are protected throughout the fulfillment process.

Important:Failure to comply with FBA product preparation requirements, safety requirements, and product restrictions may result in the refusal of inventory at the Amazon fulfillment center, disposal or return of inventory, blocking of future shipments to the fulfillment center, or charging for any unplanned services.

Dry batteries must be properly packaged so they can be safely stored and prepared for shipment. Ensure that batteries are secured within the packaging to prevent battery terminals from coming into contact with metals (including other batteries). Batteries cannot be expired or damaged and, if sold in packs, expiration dates must be visible on the packaging. These packaging guidelines include batteries sold in packs and multi-pack sets of batteries.

Related guidelines:

Requirements for Lithium Batteries or Products that Contain Lithium Batteries

Boxed Units

Sold as set

How to Label Products with Expiration Dates

Permitted packaging materials (rigid packaging):

Original manufacturer packaging

Boxes

Clamshell plastic

Prohibited packaging materials (except when used in addition to permitted rigid packaging):

Zipper-sealed bags

Shrink wrap

Packaging Guidelines

Make sure that packaged batteries can pass a 4-foot drop test onto a hard surface without breaking. A drop test consists of five drops:

Flat on base

Flat on top

Flat on longest side

Flat on shortest side

On a corner

Ensure that repackaged batteries are in boxes or clamshell packaging that is securely sealed.

If multi-pack batteries are sealed in original manufacturer packaging, no additional boxing or sealing of batteries is required. If the batteries are repackaged, then sealed boxes or sealed hard plastic clamshell packaging is required.

For lithium batteries, follow the applicable regulations as indicated inRequirements for Lithium Batteries or Products that Contain Lithium Batteries.

Ship batteries that could become loose in/from the packaging.

Ship batteries where the terminals may come in contact with each other.

Ship batteries that are held together only by zippered bags, shrink wrap, or other non-rigid packaging.

Bundled units

Multi-packs of batteries that are bundled and sold as a set must adhere to the requirements specified in thePackaging and Prep Requirementshelp page. Also, the entire bundle must collectively adhere to the rigid packaging requirements, as described below.

Definition of rigid packaging

Rigid packaging for batteries is defined as one or more of the following:

Original manufacturer packaging of clamshell plastic or blister packs.

Repackaged batteries secured in boxes that have been taped or shrink-wrapped closed. Batteries must not be able to roll in the boxes, and the battery terminals must not touch.

Repackaged batteries secured in clamshell plastic that has been taped or shrink-wrapped closed. The battery terminals must not touch within the packaging.

文章正文：亚马逊官方网址

亚马逊官方公布：Amazon handmade手工制作电子设备零配件指南

手工制作电子器件商品零配件指引

做为手工艺人，您的手工制作电子设备零配件商品务必合乎下列指引的规定：

全部商品务必合乎通用性手工工艺品归类指引的规定。

全部设计方案都务必由您自身进行并运用于商品。

大家不允许在 Amazon Handmade 市场销售一切二手、仿冒、侵犯商标权、拷贝或仿造商品和/或肖像。

不允许市场销售违背一切出版权或专利权的没经认证的工艺品团本或仿制品。阅读文章相关支配权使用者的专利权的大量信息。

维护手工工艺品的一致性

亚马逊保存追究其从一切亚马逊手工工艺品归类中清除商品的支配权。大家会将清除商品的有关状况告之受影响的手工艺人，后者可以挑选对于此事决策明确提出投诉。通告将根据商家服务平台发给手工艺人，在其中将包括亚马逊开展审批所需信息的详细信息，及其手工艺人必须向亚马逊给予此信息的时间段。

亚马逊官方网站全文详细信息：

Handmade Electronics Accessories Guidelines

As a Maker, your handmade Electronic Accessories products must adhere to the following guidelines:

All products must meet the overallHandmade Category Guidelines.

All designs must be your own, applied to the product by you.

We do not allow any used,counterfeit, trademark-infringing, replica, or knock-off products and/or imagery on Handmade.

Unauthorized copies or reproductions of artwork that violate any copyright or trademark are not allowed.Read more aboutIntellectual Property for Rights Owners.

Protecting Handmade Integrity

Amazon reserves the right, in its sole discretion, to remove a product from any Amazon Handmade category. We will notify the impacted Maker regarding the removal and the impacted Maker will have the option to appeal this decision. Notifications will be sent to the Maker through Seller Central and will include details on what is needed by Amazon to conduct an audit, as well as the time frame in which the Maker will need to provide Amazon with this information.

文章正文：亚马逊官网