亚马逊企业购卖家如何创建企业专供商品报价,详细解答看这里！亚马逊官方对汽运零担 (LTL) 和整车运输 (FTL)的详细

亚马逊企业购商家怎样建立公司特供商品价格,详尽解释看这里！亚马逊官方网对汽运物流零担 (LTL) 和整车物流 (FTL)的详尽规定引言

亚马逊企业购商家怎样建立公司特供商品价格？详尽解释看这里！：公司特供商品价格是仅含公司商品价钱、没有本人顾客商品价钱的价格。公司特供商品价格仅朝向亚马逊公司顾客，而并不是朝向亚马逊上的全部顾客。亚马逊官方网对汽运物流零担 (LTL) 和整车物流 (FTL)的详尽规定在本网页页面中，您将掌握亚马逊就寄往亚马逊营销中心的汽运物流零担 (LTL) 和整车物流 (FTL) 货件对您（即亚马逊货运物流商家）明确提出的规定。您还可以下载相关国际海运成箱运载 (FCL) 货件的协助指引。

亚马逊企业购商家怎样建立公司特供商品价格？详尽解释看这里！

公司特供商品价格

逐渐

Note:公司特供商品价格是仅含公司商品价钱、没有本人顾客商品价钱的价格。公司特供商品价格仅朝向亚马逊公司顾客，而并不是朝向亚马逊上的全部顾客。

亚马逊官方网对汽运物流零担 (LTL) 和整车物流 (FTL)的详尽规定

相关汽运物流零担、整车物流和成箱运载货件的商家规定

在本网页页面中，您将掌握亚马逊就寄往亚马逊营销中心的汽运物流零担 (LTL) 和整车物流 (FTL) 货件对您（即亚马逊货运物流商家）明确提出的规定。您还可以下载相关国际海运成箱运载 (FCL) 货件的协助指引。

关键：下列是亚马逊就寄往亚马逊营销中心的汽运物流零担/整车物流货件明确提出的规定。遵循下列指引，并确保您的承运人和经销商一样遵循以下指引，将有利于：

确保您的货件被接纳

确保您的库存量完成十分高效率和精确的装卸货物、接受和存储

防止您因货件不符本指引的需要而必须将其清除或废置，或是为其付款附加花费

有关指引

相关汽运物流零担和整车物流货件的其它规定，客户程序相关汽运物流零担和整车物流货件的商家规定及其底版载重量现行政策。

相关净重、规格及货件包裝的规定，客户程序运送和线路分配规定。

针对中小型货件，客户程序发往亚马逊的小包囊快递公司。

针对国际海运成箱运载 (FCL) 货件，立即下载这种协助指引（英语版和汉化版）。

相关亚马逊协作承运人的其他信息，客户程序亚马逊协作承运人选择项。

箱数限定

单独一个汽运物流零担货件的箱数不能超过 5,000 个。如需运输 5,000 个以上的箱子，您务必建立第二个货件。

托拍规定

应用规格为 40 x 48 英尺的四向进叉木质托拍。切勿应用由塑胶、硬纸板或胶合板等敏感材料制作的托拍运输商品。

假如散件大中型商品在装进 40 x 48 英尺的托拍的时候会发生边沿露出的状况，请应用合适该商品的托拍规格和种类。

应用做到 GMA 规范 B 级或更高級其他托拍运输商品。不管托拍材料怎样（木料、人造板和复合型材料等），GMA 规范 B 级托拍都应达到下列标准：

顶端 6 或 7 块木工板，实际在于木工板总宽

底端不少于 4 块木工板

装有用以提高支撑点的侧梁

四向进叉

侧梁的物块未检修过

仅应用 GMA 1A 级托拍运输食品行业商品。达到下列情况的托拍才算 GMA 1A 级托拍：

顶端 7 块木工板

底端 5 块木工板

装有用以提高支撑点的侧梁

四向进叉

侧梁的物块未检修过

个人护理身心健康和美妆护肤类商品只接纳 GMA 1A 和 1B 级托拍。达到下列情况的托拍才算 GMA 1B 级托拍：

顶端 6 或 7 块木工板，实际在于木工板总宽

底端不少于 4 块木工板

装有用以提高支撑点的侧梁

四向进叉

仅有 1 根侧梁可配有一个瓶塞或开展过别的类型的检修

仅应用稳定的托拍运输。

亚马逊不接纳破裂或残损的托拍，并且很有可能会拒绝接收这种托拍，有关花费由商家自主担负。

堆积托拍

并不是由小包囊承运人运输的全部协作承运人货件都务必应用托拍运载。针对不可以应用托拍运输而需选用底版载重量方法的非协作承运人货件，客户程序底版载重量现行政策。

将箱子堆积在托拍处时，请遵循下列指引：

用一个托拍运输好几个 ASIN 时，请合理隔开这种 ASIN，便于在接受时可以轻轻松松辨别。

务必遵循箱子包裝上显示信息的全部指引，如较大堆积高度、箱子方位规定和解决限定。

堆积托拍时应让亚马逊货运物流箱子识别码标识靠外，便于在没有毁坏托拍的情形下扫描仪箱子上的每一个条码。

将箱子堆积在托拍上，使其牢固且每个面平齐。提议应用堆砖法，将最重要的商品放到底端。

针对单一 ASIN 托拍，全部箱子的码放方法务必同样（即所有水准或垂直堆积）。箱子仍可向着不一样的角度旋转，但务必依照同样方法堆积。

理想化状况下，托拍的包裝高度不超过 50 英尺（箱子为 45英尺，托拍为 5 英尺）且可层叠，由于那样能合理运用室内空间并给托车空出更大室内空间。不能层叠托拍的高度不能超过 72 英尺，且空间利用率较低。

怎样堆积托拍

托拍上的每一个纸箱子都需要合乎亚马逊的货件包裝规定。

拼装： 每一个托拍上的商品都务必具有同样的货件识别码。将方案一起市场销售（如套服商品）和净重超出 100 磅的货件箱置放在一个托拍（每一个托拍一种已售商品）上，或将其固定不动在一起。净重超出 100 磅、长短超出 80 英尺或总宽超出 30 英尺的单独一个、不能固定不动的货件箱或商品（如家俱）应置放在单独的托拍上。

净重和高度： 托拍的总重不能超过 1,500 磅。单独一个托拍不可高过 72 英尺（含托拍自身的高度），除非是单独一个商品高过 72 英尺。针对单独一个托拍，假如合乎底版载重量现行政策中表述的“可固定不动”表明，其高度不能超过 98 英尺（含托拍自身的高度）。单独一个高 98 英尺的托拍将被全自动装卸搬运货车拆分为2个托拍，便于接受商品。

留意：由亚马逊协作承运人推送的单独一个托拍在 40 x 48 英尺的托拍上的高度不能超过 72 英尺。为了更好地最大限度地提升货运物流高效率，托拍应可层叠且高度不能超过 100 英尺（每一个托拍 50 英尺）。相关其他信息，客户程序亚马逊协作承运人选择项。

层叠和包囊： 务必依照规范托拍层叠规定来堆积箱子。切勿应用包装袋子、拉力带或别的打绳结捆缚货件箱。商品不可外露托拍边沿。

务必应用透明塑料拉伸缠绕膜多次包囊全部托拍，并告之承运人“切勿毁坏拉伸缠绕膜”或“切勿拆卸”。拉伸缠绕膜务必将商品完全固定在托拍上，以避免商品在物流运输全过程移动。拉伸缠绕膜务必从货堆顶端包囊到托拍并包起来托拍。不可应用拉伸缠绕膜来固定不动托拍上的承载力，拉伸缠绕膜除掉后，承载力也应维持牢固。

贴标签： 货件中的每一个箱子都务必具备一个合乎亚马逊货件标识规定的唯一亚马逊货运物流箱子识别码标识。包囊好的托拍务必在拉伸缠绕膜两侧的四个侧边贴上亚马逊货运物流托拍标识。

运载： 托拍的总高度务必保证货堆上方与海运集装箱顶端中间留出 6 英尺的空隙。在物流运输全过程中，托拍和海运集装箱内腔中间必须空出 3 英尺的间距，实际可应用充气袋以保证可靠性，应用非金属材料带或安全防护网以避免承载力挪动或爆出。最终一排托拍与海运集装箱门中间必须空出 8 英尺的空隙，用以置放垛口升降平台。

两层托拍

亚马逊营销中心接纳两层托拍，前提条件是托拍务必可以安全性装卸搬运，且不容易在物流运输全过程中导致商品残损。您可以按照必须两层层叠托拍，便于尽量提升货运物流高效率。请遵循以上指引及其相关两层托拍的以下指引：

2个托拍层叠的总高度不能超过 100.00 英尺（每一个托拍 50.00 英尺）

托拍顶端与海运集装箱顶端中间必须空出 6 英尺的室内空间，便于电动叉车安全性卸载掉托拍。

箱子应匀称齐整叠起来，不可让箱子外露托拍边沿。

箱子应层叠在转动层中，以保证货堆牢固。

堆砖法；偏重的箱子应放到货堆最底层和托拍上，以避免比较轻的箱子被挤扁或毁坏。

层叠箱子时要保证侧边和顶端平齐，以保证货堆牢固。

层叠托拍时空出充足的室内空间，便于卸载掉。

层叠托拍的总重量和箱子层叠部位应垂直居中，以保证牢固，并避免托拍在物流运输全过程中偏斜或爆出。

托拍标识规定

在托拍拉伸缠绕膜两侧的四个侧边贴上亚马逊货运物流托拍标识。

在每一个托拍上黏贴亚马逊货运物流托拍标识（每一个托拍四个标识，贴到每一个侧边的顶端正中间部位），并在托拍上的每一个箱子上黏贴亚马逊货运物流箱子识别码标识。您可以从预备处理货件网页页面打印出亚马逊货运物流箱子识别码标识和托拍标识。

将标识竖直地（不必偏斜）贴在托拍的四面，便于叉车驾驶员在安全驾驶电动叉车挨近并上升托拍时可以见到标识。

假如托拍只包括一种 ASIN，请为其贴上“单一 ASIN 托拍”标识。

用一个托拍运送好几个 SKU 时，请合理隔开不一样的 SKU，便于营销中心在接受时可以轻轻松松辨别。客户程序下列独特托拍标识规定。

关键：

依据亚马逊货运物流方案，向本地营销中心推送货件时，您必须附加黏贴四个亚马逊承运人托拍识别码标识。在托拍的四个侧边黏贴同一标识的团本，及其亚马逊货运物流托拍标识。请保证每一个托拍上的全部标识都具备同样的“托拍记数”识别码。相关其他信息，客户程序亚马逊货运物流。

不一样商品种类的独特托拍标识规定

请在标识上附加下列信息内容（假如可用）：

标识应用领域：多的人合搬净重超出 50 磅的散件商品箱子*机械设备运送超出 100 磅的散件商品箱子*混和 SKU包括超出一种已售商品（不一样 SKU 或情况）的托拍和箱子套服勿拆由致力于做为单一 SKU 市场销售的好几个商品构成的已售商品。应尽量将归属于套服的商品包裝在一个箱子内，防止分离。

关键：箱子不可超过 50 磅的规范净重限制值，除非是其包括散件净重超过 50 磅的重件商品。大家对箱子净重和规格实行严苛的管理方法现行政策。将过重或超大型箱子发送至营销中心很有可能会致使大家阻拦您将来向营销中心运输货件。相关其他信息，客户程序运送和线路分配规定。

相关必须专业预备处理的特殊商品归类的其他信息，客户程序包裝和预备处理规定。

提单 (BOL)

针对您在货件解决进展中建立的每一个汽运物流零担/整车物流货件，都务必向承运人给予合理的提单 (BOL)，便于她们可以分配配送预定。不符合下列规定的货件提单都将在送到时被拒。针对亚马逊协作汽运物流零担/整车物流货件，提单将在收件日期当日早上转化成，并可在“货件一览”的【跟踪货件】菜单栏中查询。您还能在这里在线下载空缺提单，随后对于协作承运人货件开展填好。

填好承运人向您带来的提单报表时，请遵循这种指引。有关信息务必打印出，不能笔写。大家提议使用的规范提货单模板，这有利于保证亚马逊轻轻松松鉴别并立即接受您的货件。假如您的承运人未给予模版，请确保您的提单包括下列信息：

货件的全部货件跟踪识别码和货件识别码。您可以在【规范化货件建立步骤】的【一览】中寻找这种信息。

商家名字

安排发货详细地址（街道地址、大城市、省/自治州/市辖区、邮编）

商家的法律规定名字

承运人名字和规范承运人英文字母编码 (SCAC)

承运人的承运人参照识别码（PRO 编号）

解决产品总数（每一个托拍、小箱子）信息

托车和封口识别码（仅限于大货车承载力货件）

假如未让驾驶人员记数或查验货件內容即运载、锁住和密封性托车，则在提货单上打印出“货主运载和记数”或“SLC”。

恰当的托拍和小箱子记数总数

运输费限期

在运送海运集装箱或托拍标识上标明提货单号。这能在送到亚马逊运营中心时开展迅速货运物流认证。

国际海运成箱运载 (FCL) 货件

假如国际海运成箱运载 (FCL) 货件可以安全性卸载掉且不容易在物流运输全过程中导致产品毁坏，亚马逊运营中心将接纳这类货件。您可以下载“亚马逊物流集装箱预备处理指引”（英语版和简体中文），便于打印出并供应给经销商或加工厂，或是自身参考。

分配配送

确保您的承运人把握您货件的精确提货单号。绝大多数货件信息都可以在规范化货件建立步骤的【一览】网页页面上寻找。向您的承运人给予承运人用户手册。

您的承运人必须根据承运人服务平台分配配送预定。相关大量信息，客户程序相关汽运物流零担 (LTL) 和整车物流 (FTL) 货件的承运人规定。

亚马逊官网全文详细信息：

Seller requirements for LTL, FTL, and FCL deliveries

On this page, you will learn what is required of you, the FBA seller, for less than truckload (LTL) and full truckload (FTL) deliveries to Amazon fulfillment centers.You’ll also be able to download help guides for ocean full container load (FCL) deliveries.

Important:Below are the requirements for LTL/FTL deliveries to Amazon fulfillment centers. Following these guidelines, and making sure that your carriers and suppliers follow them, will help:

Ensure that your shipments are accepted

Enable the most efficient and accurate unloading, receipt and storage of your inventory

Prevent you from having to remove or dispose of, or pay additional fees for, shipments that don't meet these guidelines

Related guidelines

For additional requirements for LTL and FTL shipments, seeCarrier requirements for LTL and FTL deliveriesandFloor Loading Policy.

For weight, dimension, and shipment packing requirements, seeShipping and routing requirements.

For smaller shipments, seeSmall parcel delivery to Amazon.

For ocean full container load (FCL) shipments, download these help guides (EnglishandChinese).

For additional information about Amazon Partnered Carriers, seeAmazon Partnered Carrier options.

Box limits

A single LTL shipment cannot exceed 5,000 boxes. To ship more than 5,000 boxes, you must create a second shipment.

Pallet requirements

Use 40 x 48 inches, 4-way access wooden pallets. Do not ship units on pallets made of weak material such as plastic, cardboard or particle board.

If a single, large unit cannot fit on a 40 x 48 inches pallet without overhanging the edges, use a pallet size and type that is suitable for the unit.

Ship units on GMA Standard B Grade or higher pallets. Regardless of the material (lumber, plywood, composite, etc.), GMA Standard B Grade pallets have:

6 or 7 boards on top, depending on board width

No less than 4 boards on bottom

Stringers for added support

4-way entry

No block repairs to stringers

Ship Grocery products on GMA 1A Grade pallets only. GMA 1A Grade pallets have:

7 boards on top

5 boards on bottom

Stringers for added support

4-way entry

No block repairs to stringers

Only GMA 1A and 1B Grade pallets are acceptable for Health & Personal Care and Beauty products. GMA 1B Grade pallets have:

6 or 7 boards on top, depending on board width

No less than 4 boards on bottom

Stringers for added support

4-way entry

Only 1 stringer may have a plug or other type of repair

Ship only on pallets that are in good condition.

Broken and damaged pallets are not acceptable and may be rejected at the seller's expense.

Build pallets

All partnered carrier shipments not delivered by small parcel carriers must be loaded on pallets. For non-partnered carrier shipments that cannot be sent on pallets and need to be floor loaded, see theFloor Loading Policy.

Follow these guidelines when stacking boxes on your pallet:

When shipping multiple ASINs on a pallet, physically separate the ASINs so that they are easy to differentiate upon receipt.

Any guidelines shown on the box packaging must be followed, such as stack height maximums, box orientation requirements, and handling restrictions.

Build pallets with the FBA box ID labels facing outwards to allow each barcode on the box to be scanned without breaking down the pallet.

Stack boxes on pallets so that they are stable and flush on all sides. Brick stacking, with heaviest items on the bottom, is recommended.

For single ASIN pallets, all boxes must be stacked the same way (i.e. horizontal or vertical). Boxes can still be turned in different directions, but they all must be stacked in the same way.

Pallets ideally have a pack height no higher than 50 inches (45 inches for boxes and 5 inches for pallet) and are stackable, as this is space efficient and maximizes trailer space. Non-stackable pallets cannot exceed 72 inches in height and are less space efficient.

How to build a pallet

Each carton on the pallet must comply withAmazon's shipment packaging requirements.

Assembly: The units on each pallet must all belong to one shipment ID. Place shipping boxes that are intended to be sold together, such as a set, and that weigh more than 100 lb on a single pallet (one sellable unit on each) or clamp them together. Single, non-clampable shipping boxes or units, such as furniture, that weigh more than 100 lb, are more than 80 inches long, or are more than 30 inches wide should be placed on their own pallet.

Weight and height: Total weight of the pallet must not exceed 1,500 lb. Single pallets must not be higher than 72 inches, including the height of the pallet, unless a single unit is taller than 72 inches. A single pallet can be up to 98 inches, including the height of the pallet, if it conforms to the "clampable" instructions outlined in theFloor Loading Policy. A single pallet that is 98 inches will be “squeezed” and split into two pallets by a clamp truck so the units can be received.

Note:Single pallets sent with an Amazon partnered carrier must be no higher than 72 inches on 40 x 48 inch pallets. To maximize freight efficiency, pallets should be stackable and no higher than 100 inches (50 inches per pallet). For more information, seeAmazon Partnered Carrier options.

Stacking and wrapping: Stage boxes using only standard pallet stacking requirements. Do not bundle shipping boxes using bags, elastic, or extra straps.The contents must not overhang the pallet edge.

All pallets must be wrapped multiple times in clear plastic stretch wrap with a "do not break stretch wrap" or "do not break down" notification to the carrier. The stretch wrap must completely hold the product to the pallet to prevent shifting during transit. The stretch wrap must wrap from the top of the stack, down to and including the pallet. The stretch wrap should not be used to stabilize the load on the pallet; the contents should be stable once the stretch wrap is removed.

Labeling: Every box on the shipment must have a unique FBA box ID label that complies with Amazon'sshipment label requirements. Wrapped pallets must have FBA pallet labels placed on all four sides on the outside of the stretch wrap.

Loading: The overall height of the pallets must allow 6 inches of clearance from the top of the stack to the roof of the container. Allow for at least 3 inches between pallets and walls while in transit by using air bags to ensure stability, non-metal straps, or a safety net to prevent the load from shifting or falling. Allow for at least 8 inches of clearance from the last row of pallets to container doors to engage a dock leveler.

Double-stacked pallets

Amazon fulfillment centers accept double-stacked pallets provided they are safe to load and unload and do not cause product damage during transit. You can double stack pallets as needed to maximize freight efficiency. Follow the above guidelines as well as the following for double-stacked pallets:

Two stacked pallets cannot exceed 100.00 inches total in height (50.00 inches per pallet stack)

Allow for at least 6 inches of space from the top of the pallet to the container ceiling to allow for the safe unloading of pallets with a forklift.

Stack boxes evenly and squarely from corner to corner and do not allow boxes to overhang the pallet edge.

Boxes should be stacked in rotating layers to ensure stack stability.

Brick stacking; heavy boxes should be on the bottom stack layers and pallets to prevent lighter boxes from being crushed or damaged.

The sides and top of the stacked boxes are flush to ensure stack stability.

Stack pallets with adequate space to allow for unloading.

Stacked pallets should have the weight and box stacks centered to ensure stability and to prevent the pallets from leaning or falling during transit.

Pallet label requirements

Place FBA pallet labels on all four sides of the pallet on the outside of the stretch wrap.

Affix FBA pallet labels to each pallet (four per pallet, one on each side in the top center) and FBA box ID labels to each box on the pallet. You can print FBA box ID and pallet labels from thePrepare shipment page.

Place labels squarely (not on an angle) on all four sides of the pallet so that the forklift driver can see them when approaching with the forklift to lift the pallet.

Label the pallet “Single ASIN Pallet” if it contains only one ASIN.

When shipping multiple SKUs on a pallet, physically separate the SKUs, so they are easy to tell apart when received at the fulfillment center. See the special pallet labeling requirements below.

Important:

When sending your shipment to a local fulfillment center under the Amazon Freight program, there are additional sets of four Amazon carrier pallet ID labels required. Place a copy of the same label on all four sides of the pallet with your FBA pallet label. Make sure that all labels on each pallet have the same “Pallet Count” number. For more information, seeAmazon Freight.

Special pallet label requirements for product types

Include the following information on labels when it applies:

LabelApplies to:Team LiftSingle-unit boxes that exceed 50 lb*Mech LiftSingle-unit boxes that exceed 100 lb*Mixed SKUPallets and boxes that contain more than one type of sellable unit (different SKU or condition)Sold as setSellable units that consist of multiple products that are intended to be sold as a single SKU.Whenever possible, wrap units belonging in a set together within the box to prevent them from being separated.

Important:Boxes must not exceed the standard weight limit of 50 lb, unless they contain a single oversize unit that exceeds 50 lb. Box weight and dimension policies are strictly enforced. Sending overweight or oversize boxes to the fulfillment center may lead to blocking of future shipments. For more information, seeShipping and routing requirements.

For more information about specific product categories that require specialized prep, seePackaging and prep requirements.

Bills of lading (BOLs)

For each LTL/FTL shipment you create in your shipping queue, you must provide a valid bill of lading (BOL) to the carrier, so it can schedule a delivery appointment. Shipment BOLs that do not meet the requirements listed below will be refused upon delivery. For Amazon partnered LTL/FTL shipments, a BOL will be generated on the morning of the pickup date and is available in theTrack Shipmenttab of the Shipment Summary.You can additionally download a blank BOL to fill in for your partnered carrier shipmenthere.

Follow these guidelines when filling out the BOL form provided by your carrier. Information must be printed, NOT handwritten. We encourage use of a standard BOL template, which helps ensure that your shipment is easy to identify and received in a timely manner. If your carrier does not provide a template, make sure your BOL includes the following information:

All Amazon Reference IDs and Shipment IDs contained in the shipment. You can find these in theSummaryof theShipment Creation Workflow.

Seller name

From address (street address, city, state, ZIP code)

Legal name of the seller

Carrier name and standard carrier alpha code (SCAC)

Carrier's shippers reference number (PRO#)

Handling unit quantity (pallet, box, each) information

Trailer and seal number (truckload shipment only)

"Shipper load and count" or "SLC" if the trailer is loaded, locked, and sealed without enabling the driver to count or inspect the shipment contents

Correct pallet and box count quantities

Freight charge terms

Include the BOL number on the shipping container or pallet label. This allows for quick freight verification upon delivery to the Amazon fulfillment center.

Ocean full container load (FCL) shipments

Amazon fulfillment centers accept ocean full container load (FCL) shipments provided they are safe to unload and do not cause product damage during transit. Download the FBA Ocean Container Preparation Guidelines (EnglishandChineseversions) to print out and share with your supplier or factory, or for yourself.

Scheduling a delivery

Ensure your carrier has an accurate BOL for your shipment. Most of the shipment information is found in theSummarypage of theshipment creation workflow. Provide your carrier with theUser Manual for Carriers.

Your carrier will need to schedule a delivery appointment throughCarrier Central. For more information, seeCarrier requirements for Less than Truckload (LTL) and Full Truckload (FTL) deliveries.

文章正文：亚马逊官方网址